Hydraulic rescue tools are used by emergency rescue personnel to assist vehicle extrication of crash victims, as well as other rescues from small spaces. These tools include cutters, spreaders, door busters and rams. They are popularly referred to in the English speaking Commonwealth nations, as well as the USA and Canada as Jaws of Life, a trademark of Hurst Performance, Inc. The Jaws of Life was first used in 1963 as a tool to free race car drivers from their vehicles after accidents.
Hydraulic rescue tools are powered by an hydraulic pump, which can be hand-, foot-, or engine-powered, or even built into the tool. These tools may be either single-acting, where hydraulic pressure will only move the cylinder in one direction, and the return to starting position is accomplished using a pressure-relief valve and spring setup, or dual-acting, in which hydraulic pressure is used to both open and close the hydraulic cylinder.
Contents |
Previously rescuers often used circular saws for vehicle extrication, but these suffered from several drawbacks. Saws can generate sparks, which could start a fire, create loud noise, which could stress the victim, and are often slow. Alternatively, rescuers could try to pry open the vehicle doors with a crowbar or Halligan bar, but this could compromise the stability of the vehicle, injure the victims further, or inadvertently trigger the airbags of the vehicle.
In comparison, hydraulic spreader-cutters are quieter, faster, and more versatile: they can cut, open, and even lift a vehicle. Jaws of Life is a now trademarked line of tools originally developed by Hurst Performance, located on Jackson Road in Warminster, Pennsylvania. Hurst Performance began to export parts to a European company to avoid import duty. In partnership with Zumro resQtec for use in auto racing, with Hurst targeting the American market and resQtec targeting the European market. The hydraulic spreader was originally developed in 1972 by Tim Smith and Mike Brick, who later developed a cutter and a hydraulic ram. When an occupant is trapped the tool is used to pry or cut the car to remove the occupant. It takes about two minutes to take the roof off a car. Mike Brick coined the phrase "Jaws of Life" after he observed people saying that their new device "snatched people from the jaws of death." Later Brick went on to develop a single rescue tool that could perform all the functions of rescue — push, pull, cut and spread. His patent for this unique design eventually led to the Phoenix Rescue tool, which incorporates his design to this day.
Other manufacturers (including Holmatro and Lukas, amongst others) make equivalent tools.
The cutter is a hydraulic tool which is designed to cut through metal — a hydraulically powered shears. It is often called a crab-cutter, owing to the shape and configuration of its blades. Sometimes specified as to its capacity to cut a solid circular steel bar, these are most commonly used to cut through a vehicle's structure in an extraction operation. Cutter blades are replaceable, and blade development progresses as vehicle technology progresses in order to be able to cope with the new car protection technology.
A spreader is a hydraulic tool designed with two arms which come together in a narrow tip, and which uses hydraulic pressure to separate or spread the arms. The tip of the tool can be inserted into a narrow gap between two vehicle panels (such as between two doors, or between a door and a fender) — when the tool is operated, the arms are opened, pushing apart the metal in the panels. Spreaders may also be used to "pop" vehicle doors from their hinges.
Whilst a cutter or spreader tool is designed for a particular application, a combination tool, or combi-tool as popularly referred to by the fire department, is also available which combines the cutting and spreading functions of separate tools into a single tool. In operation, the tips of the spreader-cutter's blades are wedged into a seam or gap — for example, around a vehicle door — and the device engaged. The hydraulic pump, attached to the tool or as a separate unit, powers a piston that pushes the blades apart with great force and spreads the seam. Once the seam has been spread, the now-open blades can be repositioned around the metal. The device is engaged in reverse and the blades close, cutting through metal. Repeating this process allows a rescuer to quickly open a gap wide enough to pull free a trapped victim. The blades can spread or cut with a force of several tons or kilonewtons with the tips of the blades spreading up to a meter.
This operation can also be performed by dedicated spreading and cutting tools, which are designed especially for their own operations and may be required for some rescues. These tools sometimes have lower capabilities when compared to the dedicated tool (e.g. a smaller spreading range) but may be useful where space is at a premium on fire and rescue vehicles, or when the budget does not allow for a separate cutter and spreader tool.
Many manufacturers utilize the body of their dedicated cutting tool for the combination tool. Specially engineered combination blades that are designed to spread and cut are used on the cutter body. If the end user decides later to add a separate cutter and spreader, the blades of the combination tool can be changed to make it a cutter only.
Rams are used far less than spreader-cutters in auto rescues; nonetheless, they serve an important purpose. There are many types and sizes, including single-piston, dual-piston and telescopic rams. Sizes commonly vary from 50.80 cm (20") to 178 cm (70") (extended). Rams use more hydraulic fluid during operation than spreader-cutters, so it is essential that the pump being used have enough capacity to allow the ram to reach full extension.
The tools operate on the basis of hydraulic fluid pressure of up to 720 bar (10,000 psi), which must be provided from a power source. At present, there are three different means of generating the pressure. The most commonly used source is a separate power unit, a small petrol (gasoline) engine connected to an hydraulic pump. The hydraulic fluid is pressurised in the pump, and conveyed in a hose under pressure to the tool.
Alternative power sources are a small electrical pump in the tool powered by a heavy duty rechargeable battery, and a hand- or foot-operated pump also connected to the tool directly. These are useful for lighter-duty use and do not require the storage space taken up by the separate power unit and associated lengths of hose.
Media related to [//commons.wikimedia.org/wiki/Category:Hydraulic_rescue_tools Hydraulic rescue tools] at Wikimedia Commons
|
||||||||